{"id":29955,"date":"2024-06-14T15:17:28","date_gmt":"2024-06-14T06:17:28","guid":{"rendered":"https:\/\/us.meviy.misumi-ec.com\/help\/?p=29955"},"modified":"2026-03-09T10:39:57","modified_gmt":"2026-03-09T01:39:57","slug":"%e6%96%b0%e8%a8%ad%ef%bc%9a%e7%b3%b8%e9%9d%a2%e5%8f%96%e3%82%8a","status":"publish","type":"post","link":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/technical_info-en-c\/shm_conditions-en-c\/29955\/","title":{"rendered":"About Edge Breaking"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Edge Breaking Standards\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n
Model Examples<\/th>\nFeature Example<\/th>\nStandard Values<\/th>\n<\/tr>\n
Light Edge Breaking<\/th>\nHeavy Edge Breaking<\/th>\n<\/tr>\n
\"\"<\/td>\n\n
    \n \t
  • \u2460External Corner<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
None<\/td>\n\n
    \n \t
  • External Corners chamfered C1mm.<\/li>\n \t
  • Corners less than 30\u00b0 or greater than 170\u00b0 are excluded.<\/li>\n \t
  • \"\"<\/li>\n \t
  • External Corner Chamfering<\/li>\n<\/ul>\n<\/td>\n<\/tr>\n
\n
    \n \t
  • \u2461Sheet surface Edges<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
\n
    \n \t
  • Remove burrs and flash and break edges to approx. R0.1<\/li>\n<\/ul>\n\"\"<\/td>\n
\n
    \n \t
  • Remove burrs and flash and break edges to R0.2 or larger (approx. R0.3)<\/li>\n<\/ul>\n\"\"<\/td>\n<\/tr>\n
\n
    \n \t
  • \u2462Narrow Slit Area<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
No burrs or flash of 0.1mm or larger<\/td>\nFinish burrs and flash and Break Edges to approx. R0.1<\/td>\n<\/tr>\n
\n
    \n \t
  • \u2463Narrow cutouts and small holes<\/li>\n \t
  • \"\"<\/li>\n<\/ul>\n<\/td>\n
No burrs or flash of 0.1mm or larger<\/td>\nFinish burrs and flash and Break Edges to approx. R0.1<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Edge Breaking Appearance\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Light Edge Breaking Finish\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
    \n \t
  • There is a possibility of minor scratches on appearance surfaces from the double-sided deburring machine used to eliminate burrs.<\/li>\n \t
  • Edge breaking and engraving cannot both be specified on the same model. The edge breaking process can cause the engraving to fade.<\/li>\n \t
  • Transparent resin parts will have the edge breaking finish as standard.<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
    Acrylic (Transparent), thickness 8.0\u339c<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
    304 Stainless Steel 2B, thickness 3.0\u339c<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Heavy Edge Breaking Finish\n<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
      \n \t
    • Sheet surface edges are broken to R0.2 or larger using a double-sided deburring machine, and external corners are chamfered to C1 by laser cutting.\n<\/li>\n \t
    • Fine scratches may occur on sheet surfaces when Edge Breaking sheet surface edges.\n<\/li>\n \t
    • Heavy Edge Breaking is not available with engraving, as characters may become faint.\n<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
      Sheet Surface Edge 304SS(2B), Thickness 6.0mm<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t
      External Corner Chamfer 304SS(2B), Thickness 6.0mm<\/figcaption>\n\t\t\t\t\t\t\t\t\t\t<\/figure>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      \n

      Caution<\/p>\nCases Where Edge Breaking is Restricted<\/u><\/b>\n

      Since Edge Breaking is performed by a deburring machine before bending, narrow slits will have a fine edge break finish (approx. R0.1).<\/div>\n
      \n
      \n\n<\/div>\n
      \n\n<\/div>\n<\/div>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      \n

      Caution<\/p>\nCases where External Corner Chamfering is Not Applicable<\/u><\/b>\n

      \n
      \n
      1. Model corner includes curves<\/div>\n\n<\/div>\n
      \n
      2. Acute angles less than 30\u00b0 and obtuse angles greater than 170\u00b0<\/div>\n<\/div>\n<\/div>\n<\/div>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

      Edge Breaking Standards Model Examples Feature Example Standard Values Light Edge Breaking Heavy Edge Breaking \u2460External Corner None External Corners chamfered C1mm. Corners less than 30\u00b0 or greater than 170\u00b0 are excluded. External Corner Chamfering \u2461Sheet surface Edges Remove burrs and flash and break edges to approx. R0.1 Remove burrs and flash and break edges to R0.2 or larger (approx. R0.3) \u2462Narrow Slit Area No burrs or flash of 0.1mm or larger Finish burrs and flash and Break Edges to approx. R0.1 \u2463Narrow cutouts and small holes No burrs or flash of 0.1mm or larger Finish burrs and flash and Break Edges to approx. R0.1 Edge Breaking Appearance Light Edge […]<\/p>\n","protected":false},"author":61,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[112],"tags":[132],"class_list":["post-29955","post","type-post","status-publish","format-standard","hentry","category-shm_conditions-en-c","tag-technical_shm-en"],"views":1088,"_links":{"self":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/29955","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/users\/61"}],"replies":[{"embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/comments?post=29955"}],"version-history":[{"count":19,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/29955\/revisions"}],"predecessor-version":[{"id":35495,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/29955\/revisions\/35495"}],"wp:attachment":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/media?parent=29955"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/categories?post=29955"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/tags?post=29955"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}