{"id":9718,"date":"2021-02-02T12:47:00","date_gmt":"2021-02-02T03:47:00","guid":{"rendered":"https:\/\/us.meviy.misumi-ec.com\/help\/?p=3327"},"modified":"2025-08-04T10:18:47","modified_gmt":"2025-08-04T01:18:47","slug":"%e3%82%b0%e3%83%ab%e3%83%bc%e3%83%97%e5%8c%96%e3%81%95%e3%82%8c%e3%81%9f%e7%a9%b4%e3%81%b8%e5%af%b8%e6%b3%95%e5%85%ac%e5%b7%ae%e3%82%92%e8%bf%bd%e5%8a%a0%e3%81%97%e3%81%9f%e5%a0%b4%e5%90%88","status":"publish","type":"post","link":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/technical_info-en-c\/mpb_guideline-en-c\/9718\/","title":{"rendered":"Shape Disparity between 3D Model and Finish"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

In general, the product will be true to the 3D CAD data. However, in the following cases, there may be differences between the 3D CAD data and the actual product.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Internal\/External Sharp Corners<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

If an external corner is sharp or is less than C0.5, the finish will be as follows:<\/p>

\u00b7 External corner C0.1 to 0.5 or less<\/p>

For internal sharp corners, the finish will be as follows:<\/p>

\u00b7 Internal corner R0.1 to R0.5 or less<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

The bottom shape of the blind hole<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
  • Even if the bottom of the model is flat, the finished product may be a cone shape due to processing characteristics, and vice versa. This may cause the hole to penetrate, interfere with other shape elements, deform, or bulge.<\/li>
  • If not acceptable, please fill the comment field of hole information instructions with “hole diameter(\u00f8), depth, flat bottom” and request a manual quotation from meviy support. We will shortly provide you a formal quotation.<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Pilot Hole for Tapped\/Precision Hole<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The pilot-hole depth may not be machined exactly as shown in the model, and if the effective depth (h) exceeds the reference value [model depth minus pilot-hole remaining depth] the pilot hole may penetrate through and interfere with other shape elements.<\/p>

    The pilot-hole diameter may also not be machined exactly as shown in the model.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\n\n\n\n
    \"Pilot<\/td>\n<\/tr>\n
    Pilot-hole depth reference value\u00a0=\u00a0pitch \u00d7 2.5 + 2\u00a0mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\n\n\n\n
    \"Pilot<\/td>\n<\/tr>\n
    Pilot-hole remaining depth reference value\u00a0=\u00a02.7\u00a0mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Corner relief shape for pocket grinding<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\tWhen grinding is specified on the inner surface of a pocket, a relief shape is created in the corners.\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\tRelief groove Width 2~3mm, Max. 4mm\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\tRelief hole \u00d82~3 approx. \u00d84 max.\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

    In general, the product will be true to the 3D CAD data. However, in the following cases, there may be differences between the 3D CAD data and the actual product. Internal\/External Sharp Corners If an external corner is sharp or is less than C0.5, the finish will be as follows: \u00b7 External corner C0.1 to 0.5 or less For internal sharp corners, the finish will be as follows: \u00b7 Internal corner R0.1 to R0.5 or less The bottom shape of the blind hole Even if the bottom of the model is flat, the finished product may be a cone shape due to processing characteristics, and vice versa. This may cause […]<\/p>\n","protected":false},"author":15,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[116],"tags":[136],"class_list":["post-9718","post","type-post","status-publish","format-standard","hentry","category-mpb_guideline-en-c","tag-technical_mpb-en"],"views":1160,"_links":{"self":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/9718","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/users\/15"}],"replies":[{"embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/comments?post=9718"}],"version-history":[{"count":12,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/9718\/revisions"}],"predecessor-version":[{"id":32257,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/posts\/9718\/revisions\/32257"}],"wp:attachment":[{"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/media?parent=9718"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/categories?post=9718"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/us.meviy.misumi-ec.com\/help\/en\/wp-json\/wp\/v2\/tags?post=9718"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}