- HELP
- Technical Information
- Sheet metal
- Applicable parts/Materials
- Material Standards and Materials Used
Material Standards and Materials Used
The table below lists the JIS standard materials used for each selectable equivalent AISI material. The materials used are equivalent to JIS standards and do not fully comply with AISI・SAE・ANSI standards.
| No | Material | JIS | GB | Notes |
|---|---|---|---|---|
| 1 | Low Carbon Steel (Cold/Hot Rolled) | SPCC | SPCC | – |
| 2 | Low Carbon Steel (Cold Rolled) (Hot Zinc Plating) | SPCC（Hot Zinc Plating） | – | – |
| 3 | Low Carbon Steel (Cold/Hot Rolled) | SPHC | Q235 | – |
| 4 | Low Carbon Steel (Cold Rolled) (Electrolytic Zinc Plating) | SECC（Electrolytic Zinc Plating） | – | – |
| 5 | 1018 Carbon Steel | SS400 | – | Uses materials that are equivalent to JIS G 3101 standards. |
| 6 | Cold Rolled Low Carbon Steel (for Shims) *6 | SPCC（for SHIM） | – | – |
| 7 | 5052 Aluminum Alloy | A5052 | 5052 H32 | Uses materials that are equivalent to JIS H 4000 standards. |
| 8 | 304 Stainless Steel | SUS304 | 06Cr19Ni10 | Uses materials that are equivalent to JIS G 4305 standards. |
| 9 | 304 Stainless Steel (for Shims) *6 | SUS304(H)（for SHIM） | – | Uses materials that are equivalent to JIS G 4313 standards. |
| 10 | 430 Stainless Steel | SUS430 | – | Uses materials that are equivalent to JIS G 4305 standards. |
Caution
- Steel types that are not included in the JIS standard, or for which there is no comparable steel even if a JIS standard exists, are not listed.
- The steel types and standards listed are for comparison and are for reference only.
- Please note that the chemical composition may vary.