Clear Resin Specification

General Tolerance Standards for Machining Dimensions

The tolerance for external dimensions is ±1.0. See the table below for the tolerances used for other sections.

Standard Part Tolerance Grade Dimension Tolerance
Symbol Description
Dimensional tolerances for length dimensions, excluding chamfered parts m Medium 0.5 ≦ X ≦ 3 ±0.1
3 < X ≦ 6 ±0.1
6 < X ≦ 30 ±0.2
30 < X ≦ 120 ±0.3
120 < X ≦ 400 ±0.5
400 < X ≦ 1,000 ±0.8
1,000 < X ≦ 2,000 ±1.2
Dimensional tolerances for length dimensions of chamfered parts c Rough 0.5 ≦ X ≦ 3 ±0.4
3 < X ≦ 6 ±1
6 < X ±2
*General tolerances for JIS B 0405 cutting are used.
Standard Value Example
If the internal angles of the model are sharp corners or are less than R3, machining of around R3 will be applied. (If you would like the internal angle to be finished to a sharp corner or to less than R3, contact meviy support for an estimate.) Example

Dimensional Changes for Clear Resin

Unlike metal, resin is a material that easily deforms as a result of temperature and humidity and changes in dimensions. Accuracy is assured in the following way:
  • Testing is conducted in a temperature- and humidity-controlled environment
  • Accuracy assurance is based on the results of inspections performed immediately before shipment.

↑